User`s manual

27
3-9 PnP/PCI Configuration Setup
This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the
CPU itself uses when communicating with its own special components. This section covers
some very technical items and it is strongly recommended that only experienced users should
make any changes to the default settings.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
PnP/PCI Configurations
Item Help
Init Display First PCI Slot
Reset Configuration Data Disablsed
x IRQ Resources Press Enter
PCI/VGA Palette Snoop Disabled
INT Pin 1 assignment Auto
INT Pin 2 assignment Auto
INT Pin 3 assignment Auto
INT Pin 4 assignment Auto
INT Pin 5 assignment Auto
INT Pin 6 assignment Auto
INT Pin 7 assignment Auto
INT Pin 8 assignment Auto
** PCI Express relative items**
Maximum Payload Size 4096
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
Please refer to section 3-9-1
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is only
available if there is Hardware Monitor onboard.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Shutdown Temperature Disabled
Vcore 4.88v
Vcc 4.88v
VSB 4.88v
Voltage Battery 1.77V
Temperature 1 58
°
C
Temperature 2 65
°
C
Temperature 3 46
°
C
FAN 1 0 RPM
FAN 2 6172 RPM
SFAN 3 0 RPM
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this