User`s manual

5
Chapter 2
Hardware Installation
2-1 Install Memory
This motherboard provides two 240-pin DDR2 DUAL INLINE MEMORY MODULES
(DIMM) socket for DDR2 memory expansion available from minimum memory volume of
128MB to maximum memory volume of
4
GB DDR2 DIMM.
Valid Memory Configurations
Bank 240-Pin DIMM PCS Total Memory
Bank 0, 1 (DIMM1) DDR2 533 X1
128MB∼2GB
Bank 2, 3 (DIMM2) DDR2 533 X1
128MB∼2GB
Total Memory (Max.4GB)
2
128MB∼4GB
Recommend DIMM Module Combination
1. One DIMM Module ----Plug in DIMM1
2. Two DIMM Modules---Plug in DIMM1 and DIMM2 for Dual channel function
Install DDR2 SDRAM modules to your motherboard is not difficult, you can refer to figure
below to see how to install a 240-Pin DDR2 533 SDRAM module.
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
2-2 Expansion Cards
The Intel
®
945GC motherboard series offer two 32-bit PCI slots guarantee the rich
connectivity for the I/O of peripherals. And one PCI Express x1 I/O slot. The motherboards
are designed of tackling the profuse multimedia requirements nowadays.
.