User`s manual

INSTALLATIONS
12
JP6: Clear CMOS Contents
Use JP6, a 3-pin header, to clear the CMOS contents. Note that the
ATX-power connector should be disconnected from the CPU card before
clearing CMOS.
JP6 Setting Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
JP7: DiskOnChip Address Select
JP7 Address
D0000-D7FFF
D8000-
DFFFF (default)
J19, J20, J21, J22, J23: CRT VGA Signal Select
Use J19, J20, J21, J22, and J23 to select the CRT VGA signal, either
from the on board VGA or from an optional MicroPCI VGA.
J19/20/21/22/23 Function
On Board VGA
MicroPCI VGA