LMD5908CP PORTABLE 22CM LCD MONITOR AND DVD PLAYER PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
Changing Region Code LMD5908CP 1/ Switch unit on by using the 2/ Press the [SET UP] button on the remote control. 1 2 13 6 3 5 6 9 3/ Go to "Preference Page " by pressing the [Right Button] 3 times. 4/ Go to "Subtitle" by pressing the [Down Button] 2 times. 5/ Press [9] [6] [5] [3]. In intervals of less than 2 seconds. 6/ Change to the correct code by pressing the [Up] or [ Down] Buttons. 7/ Press the [Set Up] Button to save and exit.
Content A. Introduction ......................................................................................... 1 B. Cautions and Warnings ..................................................................... 1 C. Contents ............................................................................................ 3 D. Powering and installation .................................................................. 3 E. Controls, Indicators, and Connectors ............................................... 5 F.
A. Introduction Thank you for choosing the portable DVD player. The main features include a 22 CM Wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation.
operation, never cover or block the slots and openings with a cloth or other material. Keep the unit away from an open flame such as fire, candle etc. It is hazardous to replace the battery incorrectly. Replace the battery only with the same or equivalent type, in order to protect the environment, please dispose the battery properly. Do not use the unit in temperatures higher than 95 degrees Fahrenheit or 35 degrees Celsius. 4.Disassemble Do not attempt to disassemble the cabinet.
7.Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 4. DVD is with other regional codes cannot be played in this unit C. Contents 1. 1 x 22CM LCD Monitor & DVD Player Combo 2. 1 x Remote Control with battery (CR2025) 3. 1 x Audio/Video Cable 4. 1 x AC to DC Adapter 5. 1 x Cigarette Lighter Adapter 6. 1 x Instruction Manual 7. 1 x Rechargeable Battery 8.
Note: Unplug the apparatus when not using for a long time or intent to disconnect from the Mains power. 3. Installation In Vehicle 1) Take out carry bag and unit. Open them for installation. 2) Place unit into the bag across the waist flex and make sure four corners of unit are tightened by narrow flexes. 3) Place the bag with unit into back of car seat and fasten it into the headrest with length adjustable waist strap. 4) Handle the carrying wide strap on the top portion of bag not to turn back screen.
E. Controls, Indicators, and Connectors 1.
2. Remote Control (Refer to figure 3) 1) Setup Button 2) Up Button 3) Skip- Button 4) Enter Button 5) Reverse/Left Keypad 6) DOWN Button 7) Numeric Button 8) Display Button 9) Zoom Button 10) SD/USB/DVD Button 11) Skip+ Button 12) A-B Repeat Button 13) Forward/Right Keypad 14) 1/All Repeat Button 15) Stop Button 16) Menu Button 17) Subtitle Button 18) Audio Button 19) Play/Pause Button Figure 3 F. Loading and Playing a Disc a.
G.
H. Menu A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. I. Display 1. PLAYING TIME AND REMAINING TIME a.
2. SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle language you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘Subtitle Off’ is displayed. The Subtitle display will disappear automatically if the ‘SUBTITLE’ button is not pressed again within 3 seconds.
4. ANGLE During playback of a disc with angle function, press ‘Number 0 button’ to display the available angles for discs containing multi-angles* *NOTE: Not all discs contain this feature. (1) Current Angle Number (2) Total Number of Angle Angle Screen Display 5. ZOOM During playback press ‘ZOOM’ to enlarge the picture by 2x, 3x or 4X with the current zoom multiple.(1)Press “zoom” once, the picture will be enlarged 2X.(2)Press “zoom” a second time ,the picture will be enlarged 3X.
6. A-B REPEAT a. During playback press a first time ‘A-B’ to set the Starting Point A. b. Press ‘A-B’ a second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. c. Press A-B a third time to cancel A-B repeat and resume normal playback. A-B Repeat Starting Point A-B Repeat Ending Point A-B Repeat Cancelled 11 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
7. REPEAT a. During playback press ‘REPEAT’ constantly to see the repeat mode as right. Chapter: Repeat the current chapter Title: Repeat the current title All: Repeat all chapters and titles Repeat Off: Resume normal playback The ‘Chapter’ repeat display shows below for example: Chapter Repeat Single Elapsed When Playing Audio CDs J. Playing Audio CDs When playing an audio CD press the DISPLAY button constantly on the remote to view time information.
Total Elapsed: The current track playing and the total time that the CD has been playing. Total Remain: The current track playing and the amount of time remaining on the CD. Display Off: The CD time Information will not be displayed. Take ‘Single Elapsed’ display as a example shown above: USING THE1/ALL REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • Track- repeats the track that is playing. • All- repeats the disc that is playing.
4. Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the previous song. USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • Repeat One (repeat playback of a song) • Repeat Folder (repeat playback of a specific folder) • Repeat Off (normal playback) As you toggle through the options, the repeat mode changes. The selected repeat mode loops repeatedly until you turn it off.
L. Playing JPG files 1) Load the JPG Disc into tray. 2) Pressing the “MENU“ Key will return to the digest view,and choose the picture your desire by “RIGHT” and “LEFT”,and turn to the previous and next page by “PREVIOUS” or “NEXT”. 3) You can preview the JPG file which you selected by pressing “PLAY” or “ENTER”. 4) Pressing the “DOWN“ Key will rotate the picture 90 degrees clockwise. 5) Pressing the “UP“ Key will return to the upper mode.
M. Connecting to other Electronical Equipment 1. Connecting to a TV or another monitor ( Refer to Figure 4) a. Position the AV In/Out Switch to “Out” Position. b. Connect one end of the audio/video cable’s black (1/8” plug) plug into the unit’s DVD AV jack, and connect the other end to the AUDIO INPUT jacks on your TV or Monitor through AV adapter cable(white = left channel, red = right channel, yellow=video). Figure 4 2. Connecting to a Game or Camcorder (Refer to Figure 4) a.
3. Headphone Optional wired headphone may be used with the unit. Simply plug in the headset to either Headphone 1 jack or Headphone 2 jack on the right side of the DVD.( Refer to Figure 5) * * Figure 5 Plugging into Headphone jack 1 disables the internal speakers. 4. SD/MMC/MS Card and U disc 1) Put SD/MMC/MS Card into the SD/MMC/MS Slot and press DVD/USB/ SD to ‘SD’ and enjoy picture and MP3 etc. 2) Put U disc into the USB jack and press DVD/USB/SD to ‘USB’ and enjoy picture and MP3 etc.
N. Setup 1. General Setup Page 1) With no disc inside the player, press ‘SETUP’ to display the Main screen of the Setup Menu on the screen and “General Setup Page” appears. At the same time, “ ” is highlighted. 2) Press the ENTER button, “TV Display” is highlighted. 3) Press the or button to select the other menus in general setup page. 4) Press to enter the sub menu. 5) Press the or button to select the sub menu and press the ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus.
d) Last Memory *On: The unit will return to the last position on the disc. *Off: The unit will not return to the last position on the disc. Note: The Last position memory function only effect when OPEN operation and AV In/Out switching. 2.Video Quality Setup 1)In Setup menu, Press the or button to select “Video Quality Setup” and is highlighted. 2)Press the ENTER button, “Brightness” is highlighted. 3)Press the or button to select the other menus in video quality setup page. to enter the sub menu.
4) Press to enter the sub menu. 5) Press the or button to select the sub menu and press the ENTER to confirm your selection. 6) Repeat steps 3-5 for other menus. Note: Press to return the previous menu. a) Audio b) Subtitle c) Disc Menu Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected language is not available, the player will play and display on the screen the original recorded language contained in the disc.
O. Specifications Compatible DISC: DVD/CD/MP3/JPG Signal system: PAL Panel size: 22 CM Frequency response: 20 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.4Vrms/10kOhm Audio S/N: Better than 60 dB Dynamic range : Better than 85 dB Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm Power source: DC 9V Power consumption: 12 W Operating temperature: 5~35°C Weight : 0.89 kg Dimensions (W x D x H): 9.37 X 6.22X1.34inches 238 x 158 x 36mm Battery Type: Li-Polymer P.
battery in optimum condition. Under no circumstances short the battery terminals, store the battery in a metal container, or leave the battery in a humid or damp environment. Ideally, store the battery in an airtight container with desiccant or other dehumidifying agent. Each full recharge takes approximately six-hours and one full charge can provide power to the player for at least 2.5 hours. During recharge, the red indicator will stay on.
Installing the Battery Pack: 1. First, make sure the player is in “Power Off” mode and that the AC power supply has been disconnected. 2. Flip down the monitor. 3. Push the battery towards the rear flank of the player until it locks into position. The lock position is indicated by a click. The unit will fit snugly to the player. Figure 6. Installing the DVD Player Battery Removing the Battery Pack: 1. First, make sure the player is in “Power Off” mode. 2. Press the release button on the side of battery. 3.
Q. Troubleshooting PROBLEM No sound or distorted sound SOLUTION • Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. Can’t advance through a movie • You can’t advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. The icon ( ) appears on screen The feature or action cannot be completed at this time because: 1.
Troubleshooting (Cont) PROBLEM IR sensor inoperative Disc won’t play Play starts, but then stops immediately SOLUTION • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. • Insert a disc with the label side facing up. • Check the type of disc you put into disc tray. This DVD only plays digital video discs, audio CDs and MP3s.
