Manual

Record & Disk Management
46
Some models may not support POS recording.
You can add more auto modes on intelligence record. Click “Advanced” button
to pop up a window as shown below. Check the modes in the window and then
click “Add” button to show the modes in the record mode list (in the window, the
checked modes can be shown in the record mode list while the unchecked
modes cannot; you cannot only check “Always(24x7) Record)”.
Select one auto mode to pop up the corresponding window. Set the encode,
GOP, resolution, FPS, bitrate type, quality, max bitrate and audio of each
camera and then click “OK” to save the settings. Please adjust the parameters
according to the actual condition.
Always(24x7) Record+Motion Record+Sensor Record+Analytics Record+POS
Record: Normal record is enabled all the time; motion/sensor/intelligence alarm
record will be enabled when motion/sensor/intelligence alarm happens.
Video Encode: the video encode format of the camera.
GOP: group of pictures.
Resolution: the higher the resolution is, the clearer the image is.
FPS: the higher the frame rate is, the more fluency the video is. However, more
storage room will be taken up.
Bitrate Type:CBR and VBR are optional. CBR means that no matter how much
change is seen in the video scene, the compression bitrate will be kept constant.