Manual

PTZ
42
①
②
③
Enter the cruise name in the “Add Cruise” window and then click “Add
preset” to pop up the “Add Preset” window (Before adding preset to the cruise,
please add preset of the dome first).
In the “Add Preset” window, select the preset name, preset time and
preset speed and then click “OK” button.
In the “Add Cruise” window, you can click to reselect the preset, then
change the preset time and speed. Click to delete the preset. Click “Add”
button to save the cruise.
Click to start the cruise and click to stop the cruise in the cruise list of
the cruise operation tab; click “Delete” button to delete the selected cruise.
You can also go to cruise setting interface for cruise setting, see 6.3 Cruise
Setting for details.
Click StartSettingsCameraPTZPreset to go to the interface as shown
below.
6.2 Preset Setting
Select camera and then click “Add” button to add preset; or click in the
camera list on the right side of the interface to display the preset information of
the dome and then click to add preset. The operations of the “Add
Preset” window are similar to that of the PTZ control interface; please see 6.1 PTZ
Control Interface Introduction for details.

Add Preset