Manual

Wizard & Main Interface
16
⑥ Add Camera. Click “Refresh” to refresh the list of online IP cameras which
are in the same local network with DVR and then click to add the searched
camera. Click “Add All” to add all the cameras in the list. Click to delete the
added camera. Click “Delete All” to delete all the added cameras.
Click to edit the searched IP camera as shown on the below left. Enter the
new IP address, subnet mask, gateway and the password of the camera. Click
“OK” to save the settings.
Click to edit the added camera as shown on the above right. Enter the new
camera name, IP address, port, username and the password of the camera. You
can check “Sync to IPC” to modify the IP address of the IPC via dierent network
segments for being in the same network segment with the DVR. You can click
“Test” to test the eectiveness of the input information. Click “OK” to save the
settings. You can change the camera name only if it’s an analog camera or the
added IPC is online. Click “Next” to continue.