Manual

Device Management
93
11.1.4 DDNS Configuration
The DDNS is used to control the dynamic IP address through domain name. You
can access the DVR easily if the DDNS is enabled and configured.
Click StartSettingsNetworkDDNS to go to the interface as shown below.
Check “Enable” and then select the DDNS type. Enter the server address,
domain name, username and password according to the selected DDNS type.
Click “Test” to test the eectiveness of the input information. Click “Apply” to
save the settings.
You will have to enter the server address and domain name if some DDNS types
are selected. Go to the relative DNS website to register domain name and then
enter the registered domain information here). Now we take dvrdydns.com for
example.
①
Enter www.dvrdydns.com in the address bar of a web browser to visit its
DNS website.