Manual

Port
Protocolt
(TCP/UDP)
Descriptions
80 TCP
443 TCP
Description: HTTP communication port. It is opened by default
and used to access the WEB client.
Authentication: Username and password
Encryption: NO
Description: HTTPs communication port. It is opened by default
and used to access the WEB client.
Authentication: Username and password
Encryption: TLS
Description: RTSP communication port. It is closed by default.
After enabling RTSP function, this port will be opened and used
to transfer audio and video stream.
Authentication: Username and password (Digest)
Encryption: NO
Description: Private communication port. It is opened by default
and used to transfer audio and video stream.
Authentication: Username and password (Digest)
Encryption: AES
554 TCP
6036 TCP
9036 TCP
41952 TCP
Description: This port is opened by default which is mainly used
to receive the information sent by the POS terminal or printer.
The information will be overlaid on the image of the IPC you
have configured in previewing or recording mode.
Authentication: NO
Encryption: NO
41953 TCP
Description: This port is opened by default which is mainly used
to receive the request sent by other UPnP devices and
communicate with other UPNP devices.
Authentication: NO
Encryption: NO
1900 UDP
Description: This port is closed by default. After the UPnP function
is enabled, this port is enabled too. It is mainly used to receive the
request sent by other UPnP devices and communicate with other
UPNP devices.
Authentication: NO
Encryption: NO
Description: This port is opened by default which is used to
enable, find and run SSDP. Additionally, it is also used to listen to
and receive the multicast packets from other online UPnP
devices.
Authentication: NO
Encryption: NO
Appendix D Communication Port List
123