Manual

Account & Permission Management

②

③

Check “Enable” and then choose “Enable Allow List (white list)” or “Enable

Block List (black list)” (the PC client of which the IP address is in the allow list can

access DVR remotely while the PC client in the block list cannot).

Add IP/IP segment/MAC. Click “Add IP” or “Add MAC” and then check

“Enable” in the popup window (only if you check it can the IP/IP segment/MAC

you add be eective). Enter the IP/IP segment/MAC and then click “OK”. In the

above interface, click to edit IP/IP segment/MAC, click to delete it. Click

“Apply” to save the settings.

10.5 Preview On Logout

Click StartSettingsAccount and AuthoritySecurityPreview On Logout to

go to the following interface.

Set a camera and then enable or disable the preview permission on logout as

required. If a camera’s preview permission on logout is “ON”, you can view the

live image of the camera when the system is logged out, or the live image of the

camera cannot be seen when logged out.