Manual

Playback & Backup

②

③

④

Select one camera in the interface and then click the “Open” button.

Click the image box to play the record in the small playback box on the left

side of the interface (the box which has image inside indicates that the record

data exist).

Refer to the picture below. Drag the color blocks on the time scale to select

the record data and then click the “Backup” button to pop up the “Record

Backup” window as shown below. Select the device name, backup format and

path and then click the “Backup” button to start the backup.

camera thumbnail number is more than 64, the cameras will be listed directly by

their camera name, not the thumbnail. A maximum of 196 camera names can be

listed. If the camera name number is more than 196, the time view mode will be

disabled and the camera view mode will be available only.

Note: If you back up the record in private format, the system will back up a RPAS player to

USB device automatically. The private format record can be played by RPAS player only.