Manual

Record & Disk Management
50
You can manually set the record start time and end time. Click or and
then click “Manual” on each day to pop up a window as shown below. Set the
start and end time in the window and then click “OK” to save the settings.
Click “All” to set all day recording; click “Reverse” to swap the selected and
unselected time in a day; click “Clear All” to clear all the selected area in a day.
Click “Copy To” to copy the schedule of the day to other days. Refer to the
picture below.
Check the days in the window and then click “OK” to save the settings.
Click “All” to set all week recording; click “Reverse” to swap the selected and
unselected time in a week; click “Clear All” to clear all the selected area in a
week.
Click or and then click “Manual” beside to set the week schedule.
Refer to the picture below. Set the start and end time, check the days in the
window and then click “OK” to save the settings

Set Week Schedule