Manual

7 Record & Disk Management
45
7.1 Record Configuration
7.1.1 Mode Configuration
Please format the HDDs before recording (refer to 7.5 Disk Management for
details). Click StartSettingsRecordMode Settings to go to the mode
settings interface. You can set the record time under the “Manual Record
Settings” and then click “Apply” button to save the settings. There are two
record modes: auto mode and manual mode.
Motion Record: Motion alarm record will be enabled when motion alarm
happens.
Sensor Record: Sensor alarm record will be enabled when sensor alarm
happens.
Motion Record+Sensor Record: Motion/sensor alarm record will be enabled
when motion/sensor alarm happens.
Always(24x7) Record+Motion Record: Normal record is enabled all the time;
motion alarm record will be started when motion alarm happens.
Always(24x7) Record+Sensor Record: Normal record is enabled all the time;
sensor alarm record will be started when sensor alarm happens.
Always(24x7) Record+Motion Record+Sensor Record: Normal record is enabled
all the time; motion/sensor alarm record will be enabled when motion/sensor
alarm happens.
Always(24x7) Record+Motion Record+Sensor Record+Analytics Record: Normal
record is enabled all the time; motion/sensor/intelligence alarm record will be
enabled when motion/sensor/intelligence alarm happens.

Auto Mode