Manual

PTZ
43
Select camera and preset. You can enter the new name of the preset and then
click to save the new preset name. Adjust the rotating speed, position,
zoom, focus and iris of the preset and then click “Save Position” to save the
preset.

Edit Preset
Select camera and preset and then click “Delete” to delete the preset.

Delete Preset
Click in the camera list on the right side of the interface to display the cruise
information of the dome and then click to add cruise. The operations of
the “Add Cruise” window are similar to that of the PTZ control interface; please
see 6.1 PTZ Control Interface Introduction for details.

Add Cruise
Select the camera and cruise in the “Cruise” interface. Enter the new cruise
name and then click to save the cruise name. Click “Add Preset” to add
preset to the cruise. Click to edit the preset. Click to delete the preset
from the cruise. Click one preset in the preset list and then click to move
down the preset and click to move up the preset. Click to start the cruise
and click to stop it.

Edit Cruise
Click StartSettingsCameraPTZCruise to go to the interface as shown
below.
6.3 Cruise Setting