Manual

PTZ
40
Double click the left button of the mouse on any area of the camera image and
then the image size will be doubled and centered on the clicked point.
Press and hold the left button of the mouse on any area of the camera image to
zoom in the image; press and hold the right button to zoom out the image.
Move the cursor of the mouse to the camera image and then slide the scroll
wheel of the mouse forward to zoom in the image, slide the scroll wheel of the
mouse backward to zoom out the image.

Advanced 3D Control
Go to PTZ protocol setting interface and then set the protocol to COC before
you call the OSD. Click “OSD Menu” to go to camera OSD setting interface. Click
to start OSD setting. The meanings of the buttons are shown in the table
below.

OSD Setting
Button Meaning
Click it to call main menu or enter the sub menu or confirm the settings.
Click it to call main menu or enter the sub menu or confirm the settings.