Manual

Live View Introduction
27
Button Menu List Meaning
Zoom In
PTZ Control
Start/Close Talk
--
Click it to go to single channel amplification interface.
Click it to go to PTZ control interface. See Chapter 6 PTZ for details.
Click it to start talk.
--
Click it to go to image adjustment interface. Refer to 5.4.5 Image
Adjustment for details.
Camera Info
Click it to view the IP camera information.
The single channel amplification interface is as shown below. Press and drag the
blue box to select the zoom in area. Click / to zoom the image. Click the
camera selection box to select other cameras for amplification. Click “Back” to
return to the live view interface.
Set dierent screen modes and cameras’ display sequences as required and
then save the display modes classified by surveillance areas, priorities and so
on. Refer to the picture below. Double click one display mode in the display
mode list to view the live images in this mode.
5.2 View Mode
5.2.1 Display Mode