Manual

Wizard & Main Interface

⑩

⑪

QRCode. Enable the NAT function in the interface or set it in the network

conﬁguration after exiting the wizard (please refer to 11.1.7 NAT Conﬁguration for

details). You can scan the QRCode through mobile client which is installed in the

mobile phone or tablet to log in the mobile client instantly. Please refer to 12.1

Mobile Client Surveillance for details. Click“OK”to save the settings.

Cloud Upgrade. Enable “Cloud Upgrade” and then click “OK” to save. If this

function is enabled, you can get the latest version from the cloud server. Please

refer to 13.1.12 Cloud Upgrade for details.

3.2 Main Interface

3.2.1 Main Interface Introduction