Manual
Introduction
4
client, it will be simultaneously enabled or disabled in the DVR
Other Functions
The DVR can be controlled and operated by the buttons on the front 
panel, the remote controller and the mouse
Setting interfaces can be switched to one another conveniently by
clicking the main menus on the top of the setting interfaces
Support DVR information viewing including basic, camera status, alarm 
status, record status, network status, disk and backup status
Support factory restoring, import and export of the system configuration, 
log view and export and local upgrading by USB mobile device
Support auto recognition of the displayer’s resolution
Click the right mouse button at any interface to go back to the upper 
interface
Click the middle mouse button at any interface to go to the live view 
interface
The display language and video format of the DVR will not be changed 
and the system logs will be reserved if you reset the DVR to factory default
Press and hold the right mouse button for 5 seconds in any interface to 
switch the output to VGA and the DVR will display the video at the lowest 
resolution which the DVR supports
1.3 Front Panel Descriptions 
The following descriptions are for reference only.
Type I:
Type II:
Name  Descriptions 
REC 
Net 
When recording, the light is blue 
Power 
When access to network , the light is blue 
Fn
Power indicator, when the device is powered , the light is blue 
No function temporarily 
Name  Descriptions 
Power 
HDD
Power Indicator, when connected, the light is blue 
The light turns blue when reading/writing HDD
Net 
Backup 
The light turns blue when it is able to access the network 
Play 
The light turns blue when backing up files and data
REC 
The light turns blue when playing video 
Audio /+ 
Power Indicator, when the device is connected, the light is 
blue 
P.T.Z / - 
1. Adjust audio 2. Increase the value in setup
Menu 
1. Enter PTZ mode 2. Decrease the value in setup
Enter Menu in live 
Info 
Backup 
Check the information of the device 
Search 
Enter backup mode in live 
Enter search mode in live 










