Manual

11.2 Basic Configuration
11.2.1 Common Configuration
Device Management
103
Click StartSettingsSystemBasicGeneral Settings to go to the following
interface.
11.2.2 Date and Time Configuration
Click StartSettingsSystemBasicDate and Time to go to the interface as
shown below. Set the system time, date format, time format and time zone of
the DVR. The default time zone is GMT+08 Beijing, Hong Kong, Shanghai, Taipei.
Set the device name, device No., language, video format and main output
resolution. Enable or disable wizard, “Log In Automatically”, “Log Out
Automatically” (if checked, you can set the wait time) “App Live Self-Adaption”
and “Dwell Automatically” (if checked, you can set the wait time). Click “Apply”
to save the settings.
Device Name: The name of the device. It may display on the client end or CMS
that help user to recognize the device remotely.
Video Format: Two modes: PAL and NTSC. Select the video format according to
the camera.
Spot: If the DVR supports spot output, you can enable spot output. Connect the
spot output device to the DVR and then set the spot output (see 5.2.4 Spot View
for details).
Dwell Automatically: Switch automatically. Check it and set “wait time”.The
system will switch images automatically if it is not operated during the time you
set.