Manual

Device Management

IP address/domain), validity date, password, province/state, region and so on.

Then click “OK” to save the settings. *If there is a signed certiﬁcate, click

“Browse” to select it and then click “Install” to install it. *Click “Create a

certiﬁcate request” to enter the following interface.

Click “Create” to create the certiﬁcate request. Then download the certiﬁcate

request and submit it to the trusted certiﬁcate authority for signature. After

receiving the signed certiﬁcate, import the certiﬁcate to the device.

③

After the certiﬁcate has been installed, enable this function and apply it.

Then the camera can be accessed by entering https://IP: https port via the web

browser (eg. https://192.168.1.201:443).

Server Port: the default server port of the DVR is 6036. The server port number

can be changed as required. The port is mainly used in network video

management system.

RTSP Port: RTSP real-time stream protocol can be used to control the sending of

real-time data. By media player which supports the RTSP real-time stream

protocol, you can view the live images synchronously. The default RTSP port is

554 and it can be changed as needed.

POS Port: the default POS port of the DVR is 9036.

Note: The HTTP port and server port of the DVR should be mapped to the router before you

access the DVR via WAN.

11.1.3 PPPoE Conﬁguration

Click StartSettingsNetworkPPPoE to go to the interface as shown below.

Check “Enable” in “PPPoE Settings” and then enter the username and password

obtained from the dealer. Click “Apply” to save the settings.