User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Wizard & Main Interface
DVR User Manual
21
up the window as shown below.
Click the main menus on the top of the camera management interface to go to corresponding
interfaces. Refer to the picture below. For instance, you can go to system setup interface by
clicking “System” tag.
3.2.3 Main Functions
Camera
The module covers the functions such as Camera Management (see
Chapter 4 Camera
Management for details), Image Settings (see 5.3 Preview Image Configuration for details),
Motion (see 9.2.1 Motion Configuration for details) and PTZ (see Chapter 6 PTZ for details)
and so on.
Record
The module covers the functions such as Encode Parameters and Record Schedule and so on.
Please see Chapter 7 Record & Disk Management for details.
Disk
The module covers the functions such as Disk Management, Storage Mode and Disk
Information and so on. Please see Chapter 7 Record & Disk Management
for details.
Alarm
The module covers the functions such as Sensor and Motion Alarm Handling and Alarm Out
Settings. Please see Chapter 9 Alarm Management for details.
Network