User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Live Preview Introduction
DVR User Manual
28
Button Menu List Meaning
Zoom In Click it to go to single channel amplification interface.
--
Click it to go to image adjustment interface. Refer to 5.3.5 Image
Adjustment for details.
-- Camera Info Click it to view the IP camera information.
The single channel amplification interface is as shown below. Press and drag the blue box to
select the zoom in area. Click / to zoom the image. Click the camera selection box
to select other cameras for amplification. Click “Back” to return to the live preview interface.
5.2 Preview Mode
5.2.1 Preview By Display Mode
Set different screen modes and cameras’ display sequences as required and then save the
display modes classified by surveillance areas, priorities and so on. Refer to the picture below.
Double click one display mode in the display mode list to view the live images in this mode.