User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
PTZ
DVR User Manual
45
Add Cruise
Click
in the camera list on the right side of the interface to display the cruise information
of the dome and then click
to add cruise. The operations of the “Add Cruise”
window are similar to that of the PTZ control interface; please see
6.1 PTZ Control Interface
Introduction for details.
Edit Cruise
Select the camera and cruise in the “Cruise” interface. Input the new cruise name and then
click
to save the cruise name. Click “Add Preset” to add preset to the cruise. Click
to edit the preset. Click
to delete the preset from the cruise. Click one preset in the
preset list and then click
to move down the preset and click to move up the preset.
Click
to start the cruise and click to stop it.
Delete Cruise
Click
in the camera list on the right side of the interface to display the cruise information
of the dome and then click
on the top right corner of the cruise to delete the cruise.