User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Live Preview Introduction
DVR User Manual
30
Go to the live preview interface and then click to pop up a little window. Set the dwell
time in the window and then click to view the live group by group according to the
camera number of the current screen mode. Double click the sequence view interface to
pause the view; double click again to restore the view. Click
to stop the view.
5.2.3 Scheme View In Sequence
Click StartSettingsSystemBasicOutput SettingsMain Output to go to the interface
as shown below.
Area ① displays all the dwell schemes; area ② shows the detailed information of the
scheme; area ③ displays all the cameras; area ④ is the tool bar (
: clear button; :
favorite button, click it to pop up a window, enter the display mode name in the window and
then click “OK” to save the current display mode; other buttons are screen mode buttons).