User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Basic Operation Guide
- 3 Wizard & Main Interface
- 4 Camera Management
- 5 Live Preview Introduction
- 6 PTZ
- 7 Record & Disk Management
- 8 Playback & Backup
- 9 Alarm Management
- 10 Account & Permission Management
- 11 Device Management
- 12 Remote Surveillance
- Appendix A FAQ
- Appendix B Calculate Recording Capacity
- Appendix C Compatible Device List
Wizard & Main Interface
DVR User Manual
16
④ Add Camera. Click “Refresh” to refresh the list of online IP cameras which are in the same
local network with DVR and then click
to add the searched camera. Click “Add All” to
add all the cameras in the list. Click to delete the added camera. Click “Delete All” to
delete all the added cameras.
Click
to edit the searched IP camera as shown on the below left. Input the new IP
address, subnet mask, gateway and the password of the camera. You can check “Sync to IPC”
to modify the IP address of the IPC via different network segments for being in the same
network segment with the DVR. Click “OK” to save the settings.