DIVERSITY SERIES QUICK START GUIDE NETWORK VIDEO RECORDERS
TABLE OF CONTENT Connection Diagram................................................................................................................ 1 HDD Installation........................................................................................................................ 2 Startup Wizard........................................................................................................................... 3 Remote Access via Web Client.......................................................
The first time you run the NVR, you will be required to set your password immediately in order to protect your privacy. Please be sure to record your username and password and save them in a secure place. If you forget your password, you will be unable to login the system, please contact your reseller to reset the password. Connection Diagram 1) You can connect to other IP cameras remotely over the Internet. 2) Connect a CAT.5E or higher RJ45 Ethernet cable for local connectivity.
HDD Installation This NVR supports two 3.5” or 2.5” SATA hard disk drives. Caution: DO NOT install or remove the hard disk drive while the device power is turned ON. a) Connect the data and power cables to the two hard disk drives and place the hard disk drives on the NVR case. 2 b) Carefully flip the NVR case and secure the hard disk drives to the NVR with the eight (8) screws. 2.5"HDD 2.5"HDD 3.5"HDD 3.
Startup Wizard Wizard setting menu includes: start wizard page, Network, Network Configuration, Date/ Time, IPC Setup, Disk, Resolution , Mobile and Summary. 1) Start Wizard 2) Network Configuration Click the Start Wizard to proceed to the next step If you connect to a router allows to use DHCP, please check the DHCP box. The router will assign automatically all the network parameters for your NVR.
PPPoE This is an advanced protocol that allows the NVR to connect to the network more directly via DSL modem. Check the “Enable PPPOE” box, and then enter the User name & Password of the PPPoE. 3G This is a prior using the mobile network, you need to connect a 3G dongle to the NVR. Enable the 3G option, enter the APN, Dial Code, User name & password according to the instruction of your 3G dongle device.
NTP NTP stands for Network Time Protocol. This feature allows you to synchronize the date and time automatically on the NVR over Internet. Therefore, the NVR needs to be connected to the Internet. Check the “NTP” box, and select the NTP server. DST DST stands for Daylight Savings Time.
4)IP Camera This menu allows you to add IP cameras to the NVR. Click Search to search IP cameras in the same network. Choose the IP camera(s) you want to add, and then click icon to add to the NVR. Enter the camera's user name & password to add the camera(s). You can also click 6 button to add individual IP camera to a single channel.
Click Search button to search IP cameras, and then click one of the IP camera in the device list. IP Address/Domain: IP address or domain name of the IP camera Alias: Name of the IP camera Position: Position to display the camera name on the screen.
5)Disk If the HDD is installed in the NVR for the first time, it must be formatted. Select the HDD and then click button Format HDD to format the HDD. Overwrite: Use this option to overwrite the old recordings on the HDD when the HDD is full. For example, if you choose the option 7 days then only the last 7 days recordings are kept on the HDD. To prevent overwriting any old recordings, select Disable.
7)Mobile If your NVR come with a P2P ID, you can scan the QR code with your mobile app to view the NVR remotely. 8)Summary You can check the system summary information you had set in the start wizard and finish the wizard. Tick “Don't show this window next time" if you don't want to display Start Wizard when system reboot next time. Click Finish button to save & exit.
Live View Screen Overview Camera Title Status Icons Camera Quick Toolbar Start Menu Task Menu Bar Camera Title To display the camera title A-: This indicates that the camera connected is an AHD camera T-: This indicates that the camera connected is a TVI camera C-: This indicates that the camera connected is a CVI camera IP: This indicates that the camera connected is an IP camera 10 NETWORK VIDEO RECORDERS | AVR SERIES System Date & Time
Status Icons This indicates that the NVR is currently recording. This icon appears when the camera has detected motion. The icon indicates that the external I/O alarm device is triggered. This icon indicates that the HDD is in error to work. This icon indicates the HDD is unformatted. This icon indicates the HDD is full. This icon indicates the HDD is read-only. VIDEO LOSS: The analog camera is disconnected. No Camera: IP camera is disconnected.
Remote Access via Web Client Use the Web Client to remotely access your NVR at anytime via a PC. Before you access the Web Client, you need to ensure that the network settings of the NVR are configured properly. The most convenient and easiest way is if you have set the NVR a static IP address . It means you only need to open the web browser on your PC and type in the static IP address you have set on the NVR.
Notice for Windows 8 and Windows10 Users: 1) If you are running Windows 8 or Windows10,you will have to right click on Internet Explorer from the start menu and select “Run as administrator”. 2) After successful Login to the Net Viewer,the system will enter into live display interface and connect to audio/video feed automatically.
Remote Live View on Mobile Devices 1.) Open the App Store (iOS) or Play Store (Android). 2.) Search for and install AVY MobileOne application. 3.) Open AVY MobileOne application ( ) 4.) Go to Device. Click ‘ ’ to add new device. Scan QR code under NVR box. Then input client port, user name, and password, and then click “Save” to log into the NVR. 5.
Copyright © AVYCON. All rights reserved. Specifications and pricing are subject to change without notice. phone: 949-752-7606 email: info@avycon.com social: @avycon_aivo website: avycon.
