User Manual

Alarm Management

DVR User Manual

9.4.3 Exception Handling Settings

① Click StartSettingsAlarmExceptionException Handling Settings to go to the

interface as shown below.

② Enable or disable “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”. The

exception handling settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm for

details).

③ Click “Apply” to save the settings.

9.5 Alarm Event Notification

9.5.1 Alarm-out

① Click StartSettingsAlarmEvent Notification to go to the following interface.

② Set the delay time and the schedule of each alarm-out. You can click “Edit Schedules” to

edit the schedules (see 7.3.1 Add Schedule for details).

③ Click “Apply” to save the settings. You can click “Test” to test the alarm output.