User Manual

Alarm Management

DVR User Manual

Check “Draw Warning Area” and then click around the area where you want to set as the

warning area in the image (the warning area should be a closed area). Uncheck the “Draw

Warning Area” if you finish the drawing. Click “Clear” button to delete the warning area.

⑤ Click “Apply” to save the settings.

⑥ Click “Processing Mode” to go to the alarm handling configuration interface of intrusion

detection.

Intrusion Detection Alarm Handling Configuration:

① Click StartSettingsAlarmIntelligence AlarmIntrusion Detection to go to the

following interface.

② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”

and “E-mail”. The alarm handling setting of intrusion detection alarm is similar to that of the