Quick Start Guide

•
•
•
•
•
•
•
•
•
•
•
•
1. WARNING AND CAUTION
2. PACKAGE
3. OVERVIEW
HD VIDEO SERVER
QUICK START GUIDE
Thank you for purchasing our product. There may be some outdated information or minor
printing errors in this manual. Updates are continually being added into the newest version of
this manual. We will readily update the products or procedures described in the manual. The
contents are subject to change without notice.
If the product does not work properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the camera yourself.
(We shall not be responsible for any problems caused by unauthorized
repair or maintenance.)
Keep product away from liquid while in use.
In the use of the product, you must be in strict compliance with the
electrical code of your country or state.
When mounting the camera on a wall or ceiling, please ensure that it is
properly mounted with the correct hardware.
Do not use camera beyond specified voltage range.
Do not drop the camera or subject it to physical shock.
Avoid touching the camera lens.
If cleaning is necessary, please use a clean cloth to wipe it gently. If the
device will not be used for a long time, please cover the lens cap to protect
the device from dirt.
Do not aim the camera directly at the sun or a very bright light source.
Do not place the camera in extremely hot, cold (operating temperature
should be -30°C~60°C), dusty, or damp locations, and do not expose it to
high electromagnetic radiation.
To avoid overheating, decent ventilation for the product is required in the
operating environment.
Some parts connected to device may need to be replaced regularly due to
environmental conditions or the lifespan of these parts. Regular
maintenance checks are recommended for all users.
TF
RESET
VIDEO I N
Au
dio
P
W
R
+ -
IN
OUT
DC12V OUT
1
1
2
2
3
3
4
4
5
5
6
6
Alarm out
LAN/
WAN
Audio Input
Audio Output
PTZ
Sensor
Monitor
DC12V
AHD/TVI camera
Device Quick Start Guide Installation CD
Mounting Screws x 4 Plastic plug x 4
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
MicroSD card slot
Reset
AHD/TVI video input
Grounding
Audio input
Audio output
Power indicator
DC12V power output
DC12V power input
PoE network interface
Analog video ouput
Alarm ouput
Alarm input
RS 485 interface