User manual

Pillar
Ironplate
UsingthebedplateofPTZasamodeltodrawthepos-
itionofboreswhichareontheironplate.Thenfixthe
PTZontheironplatebyM6screw.(Refertopicture
11.8-2)
11.8Installation
Stand-upmounttop-dowmmountandwallmount
areavailableforthisproduct,whicharesuitablefor
differentinstallationenvironment.Becausethisproduct
isintegratedpackage,pleasesetparametersofbaudrate,
controlprotocolaswellasPTZIPaddressbysettingsw-
itchnumberbeforeanyinstallation.Pleasereferto
inappendix.
，
“settingofswitchnumber”
11.8.1Stand-upMountInstallation
(Standardsetting)
1.Installationplacemustmeettherequirements
ofwiringsafetyof11.2chapter.
2.Installationpolemustbestrongandstable,
whichisnoteasytoshake.
SettingswitchnumberofPTZ
,
setting
baudrate,controlprotocolandIPaddressofPTZ
cameraaccordingtoin
appendixofusermanual.
“settingofswitchnumber”
Picture11.8-2
Picture11.8-1
11.8.3WallMountInstallation(Non
standardsetting)
1.Installationpositionmustenabletoundertake
highweightpressure,whichis4timesoftotal
weightofPTZ,bracketandbedplate.
2.Wallmustbestrongandstable;bracketmust
beensuredtoinstallonclearwall.
UsingwallbracketofPTZasamodeltoconfirm
thepositionofboreswhichareonthewall.(Refer
topicture11.8-4)
11.8.2Top-downMounting(Non
standardsetting)
Ironplate
Picture11.8-3
UsingthebedplateofPTZasamodeltodrawthe
positionofborewhichareontheironplate.(Referto
Picture11.8-3)Thenfixthetop-downPTZonthe
ironplatebyM6screw.
1.themountingpositionmustenabletoundertake
theweightofPTZ.
2.Suchamountingwayisonlysuitablefortop-
downtype.Otherwise,itwouldbewater-leaking.
Picture11.8-4
InstallationIntroduction
Drill4piecesofboreswhichareM8metalinflation
boltsinsurfaceofwall;thedepthofboreshouldbe
approximately75mm,andfixingwithM8inflation
bolts.(Refertopicture11.8-5)
50