Operating instructions

– 10 –

SPECIFICATIONS

Frenquency Response

20 Hz to 20 kHz 1dB (at send output)

30 Hz to 20 kHz 1dB (at speaker output, with processor threshold exceeded)

Distortion <0.05%, 20 Hz to 20 kHz, I dB below rated output

System Signal to Noise Ratio >80dB @ 1w. “A” WTD

Power Output 150 W/ch continuous average power, 8 ohm, both channels driven with THD <1%

Input Impedance (Channels 1-2-3 and 4) “Mic” 2k ohm

“Line” 33k ohm

Input Impedance (Stereo Channel 5/6,7/8) 33k ohm

Max. Input Level Mic: -7 dBu Line: 30 dBu Stereo. 26 dBu

Return Input Impedance 47k ohm

Fuse type 6.3A, 250V

PPA-300 System (L) 778MM x (W) 348MM x (H) 478MM

Speakers (L) 280MM x (W) 348MM x (H) 478MM

Power Tower (L) 274MM x (W) 348MM x (H) 518MM

Speaker Cables 1/4 in. to 1/4 in

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO

CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

AVTronics

PPA-300