Operation Manual

38
NOTES
Press the effective button again.
CARD READER AND USB OPERATION
This player can play USB devices and MPEG4 and JPEG files in SD, MMC and MS cards.
When reading MPEG files with large size in USB device or media card, pause may appear.
If there is no files in USB devices or media card , on-screen appears "Empty Device".
If USB devices or media card have a problem, or the operation is incorrect, the screen displays
"Device Error". Please check USB device or media card, or else unplug them then insert
them again.
If a USB device or media card which are unsupported by the machine have been connected,
the unit may 'lock-up' and won't respond to commands. In this event please switch off the power,
take out USB equipment or media card, and then switch the power back on to reset the machine.
This unit does not support USB On The Go (OTG) technology, so any deviceswith OTG
data exchange mode may not work correctly. Check this out before operation.
When inserting a media card, you should insert it in the right direction: If you are facing the
TV screen, make sure you plug-in the card with its connector facing away fromyou.
When the button is invalid, the TV screen displays:
Please take off the USB while it stops playing. Never take off it while it's playing.