User manual

38
USAGE OF USB EQUIPMENT AND 3 -IN-1 CARD READER
The 3-in-1 card reader of this player can read SD Card (Secure Digital Card), MMC Card (Multi
Media Card) MS Card (Memory Stick Card) .
1. Play USB Equipment:
Please insert USB equipment into the USB jack of this unit firstly, press [CARD/DISC] button and a
selection menu appears on screen. You may press [CARD/DISC] or [ ] button to select. If the
cursor stops in "USB" item, you may press
[OK] or [PLAY] button to confirm.
After correctly reading USB equipment data, the screen will display an operation menu. Please refer
to the part of "MPEG4 and JPEG FILE PLAYBACK" in page 32 for details.
2. Play 3-in-1 CARD READER
Please insert the FLASH card supported by this player into the
port of card reader, press [CARD/DISC] button and a selection
menu appears on screen. You may press [CARD/DISC] or [ ]
button to select. If the cursor stops in "CARD READER" item,
you may press [OK] or [PLAY] button to confirm. After correctly
reading card reader equipment data, the screen will display an
operation menu. Please refer to the part of "MPEG4 and JPEG
FILE PLAYBACK" in page 32 for details
.
If you want to use DVD function, please select "DVD" through the above-mentioned operation
steps to exit USB and card reader functions.
After pressing [CARD/DISC] button to display the selection
menu, if you do not want
to switch equipment, please move
cursor to the original one, and then press [OK] or [PLAY]
button, or wait until the menu disappears automatically.
USB jack
MEDIA CARD socket
CARD/DISC
DOWN
UP
CARD READER AND USB OPERATION
Important: Before you use the USB and card reader function, you should change
the input source of this unit to DVD.
USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0.
There are some types USB 1.1 devices:
Monitors Communication devices Audio Human Input Device(HID) Mass storage.
Most flash memory ,USB HDD
ect. belongs to Mass Storage Class . Mass Storage Class includes
2 transport manners:
1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport
2. USB 1.1 Mass Storage Class Bulk-Only Transport
This unit supports USB 1.1
Mass Storage Class Bulk-Only Transport, we are not sure that other USB
devices can be supported! So please find out about the features of USB equipments before using it.
When using USB 1.1 Mass Storage Class Bulk-Only Transport devices, please notice the file
operation system supports Windows FAT ,not support FAT32 and NTFS ect. file system.