User manual

If no signal i nput in TV, AV , S-VIDEO, SCART, YPBPR, the screen will show like the
following figure.
When in AV/ S-VIDEO/SCART input mode, there are 6 color system modes for selection:
"Auto", "PA L "," N 3.58", "N 4.43", "PAL60" and "SECAM". Select the right
system for your
video program. If you do not know which mode your video playback devices and video
media is using, you should select the auto mode or you should check and confirm this with
your suppli
er.
NOTE
If the input channel is SCART, this unit will automatically recognise RGB or CVBS
signal of SCART; when normal RGB signal appears, this unit will automatically
switch into RGB display mode. For this unit is
combined by multiple functions, when
inserting into SCART socket, it will not automatically switch into SCART mode. You
have to select SCART channel through [SOURCE] menu, that is a little different with
that of others TV set
.
AV, S-VIDEO, SCART AND YPBPR SETUP
17
AV
NO SIGNAL
4:50
VIDEO SETTING MENU
This unit will go into standby mode automatically
with no signal i nput for more than 5 minutes.
The menu setup of AV/S-VIDEO/SCART modes is much the same as that of TV mode,
except the " "section is invalid and a
little difference in color and sound modes. In order
to make this manual pithy and concise, it is not repeated here. You can find it in preceding
pages.
And the menu setup of YP
BPR is the same as that of VGA menu ,except " "section.
Please refer to posterior pages. The " " section YP
BPR used is the same as that of
TV mode. Please refer to P9for it.