Operation Manual

FM OPERATION
22
FM
FREQUENCY
FM
CHANNEL
MANUAL SEARCH
AUTO SEARCH
12
101.20MHz
SELECT
ENTER
OK
RETURN
SETUP
With radio decoder built in , you can enjoy radio programs using this unit.
Connect the FM antenna in the accessories to the FM socket on the rear panel of the TV, change
source to FM. Press [SETUP] button and a menu will show as follows:
NOTE
Up to 20 programs can be preset/stored, and you can recall them in 2 ways:
For programs 1 ~ 9, press the number buttons on remote control to access them.
For programs 10 ~ 19, press "-/--" first ,then press "0 ~ 9" to access to them;
For channel 20, just press "-/--" twice to access to it.
1. CHANNEL:
Display current channel number, press [ ] button to change channel.
2. FREQUENCY:
The frequency of current channel, press [ ] button to adjust it and press [SAVE] button to save
the new frequence of the channel.
3. MANUAL SEARCH:
Search a new channel for current channel number, press [ ] button to decrease frequency and
press [ ] button to increase frequency. When a program is found, manual search will stop and
press [SAVE] button to save the new channel.
4. AUTO SEARCH:
Search and store all the channels in FM band 87.5--108MHz. Move the cursor to AUTO SEARCH,
it become high bright, then press [ ] or [ ] button to auto search.
Press [SETUP] button to give up AUTO SEARCH.
Method 1:
Method 2:
Press [CH-] button to decrease channel and press [CH+] button to increase channel.
During scanning, you can press [SETUP] button to stop it.