Operation Manual

If no signal input in TV, AV, SCART, YPBPR the screen will show a similar signal to the
following figure.
NOTE
AV ,SCART and YPBPR SETUP
17
AV
NO SIGNAL
4:50
VIDEO SETTING MENU
This unit will go into standby mode automatically
with no signal input for 5 minutes.
The menu setup of AV/SCART /YP
BPR modes is much the same as that of TV mode, except
the " " section is invalid and a bit difference in sound mode. It is not repeated here.
You can find it in preceding pages.
If the input channel is SCART, this unit will automatically recognise RGB or CVBS
signal of SCART; when normal RGB signal appears, this unit will automatically switch
into RGB display mode. For this unit is combined by multiple functions, when inserting
into SCART socket, it will not automatically switch into SCART mode. You have to
select SCART channel through [SOURCE] menu, that is a little difference with that of
others TV set.