Operation Manual

FM MENU OPERATION
FM SETTING
Connect FM antenna with FM terminal on the left side
of analog TV, change source to FM. Press
button and a menu will show as follows:
SETUP
NOTES
Up to 40 programs can be preset/stored, and you can select them in 2 ways:
For programs 1.2.3 and 4,press the "1"."2"."3" and "4" button and wait for 3
seconds to access to them. For programs 5~40, press the number buttons to
access to them directly.
Method 1:
Method 2:
Press button to decrease channel and press button to increase
channel.
CH- CH+
During scanning, you can press button to stop it.SETUP
If without any operation in 5 minute, the panel will turn off automatically. In
saving power mode, any operation can turn on the panel.
Channel preset enables you to display current channel number, press
button to change channel.
Frequency item enables to adjust it and press button to save the new
frequence of the channel.
OK
Manual Tuning enables you to decrease frequency and press button to
increase frequency. When a program is found, manual search will stop, press
button to save the new channel.
SAVE
OK
Auto Tuning item enables you to search and store all the channels in FM band
87.5-108MHz. Move the cursor to auto search, then press or button to
begin auto search. Press button to cancel auto search. SETUP
SETUP
F M S E T T I N G
Frequency
Auto Tuning
Manual Tuning
Channel
255
377.97MHz
2610.1 inch TV/DVD user guide