Setup guide

9
10
Attach the screen support
H with four philips head
bolts P at the desired
height.
Note: See instructions
inside screen support box
to mount flat screen on
cart.
Attach the acrylic L to
the camera support G
with the philips flat
head bolts O.
11
Attach the camera
support G at the desired
height with two philips
bolts R.
H
P
O
G
L
R
12
Place the screen mount support F in the
top D, sliding the flange into the
rectangular hole and fit two carriage
bolts N in the squares.
Fix the mount support F with
flange nuts Q from the inside
of the cart using the multi
wrench V.
F
N
Q
NOTE: After finishing, tighten the nuts of the side panels carriage bolts from the
inside.