Manual

Room Alert 3E
26 AVTECH Software, Inc.
2. If you want to enable the Light Tower or Relay Switch Sensor to perform an action
when your Room Alert 3E returns to a “clear” state, click Alarm Clear Action.
3. In “Action To Perform When Alarms Occur,” you may leave the default “OFF,” or click
the check box to select “ON” for each item.
4. In “Action To Perform When Alarms Clear,” you may leave the default, “OFF,” or click
the check box to select “ON” for each item.
5. Click Accept Changes at the bottom of your screen.
6. Click Save Settings in the navigation bar to the left of your screen.