Manual

Room Alert 3E
AVTECH Software, Inc. 21
3. Enter values in the “High” and “Low” field to set high and low temperature thresholds.
4. Enter a value in the “Adjust” field to calibrate the Internal Temperature Sensor if its
reading differs from a known temperature value at that location.
5. Click Accept Changes at the bottom of your screen.
6. Click Save Settings in the navigation bar to the left of your screen.
Sensor 2 Alarm Configuration (External Digital Sensor)
You may configure alert thresholds for an external digital sensor in the “Sensor 2 Alarm
Configuration” fields.
In this example, we’ll configure an external Digital Temperature & Humidity Sensor:
1. In “Sensor Label,” you may leave the default label, “Sensor 2,” or rename it to
something more descriptive, such as “Temp & Humidity.”
2. The “Alarm On” fields automatically match the type of sensor you connect. In this
example, the “Alarm On” settings are Temperature and Humidity.
Refer to the Advanced section in this manual for instructions on
setting the default temperature scale.
NOTE
The digital port also takes a Light Tower & Relay Adapter;
however, you do not configure Light Tower or Relay options
here—refer instead to the Alarm Options section in this manual.
NOTE