User Manual
21 AVTECH Software Inc.
Conguration & Setup Screens Room Alert 32W
Analog Sensors (0-5V)
The Analog Sensor Inputs are designed to interface with sensors that output a DC voltage from 0-5V that
is proportional to the current sensor reading. There are third-party sensors available to monitor extreme
lows or extreme highs for temperature, air ow volume, uid ow rate, air or uid pressure, weight,
complex gases and more.
Analog Sensor Inputs are congured on the ‘Sensors’ tab of the ‘Settings’ page. The sensor label can be
modied for each Analog Sensor Input, and High/Low thresholds can be set to trigger alert notications.
Relay Outputs
Room Alert 32W has two built in relay outputs that can optionally be turned on or off in response to an
alarm condition. Each Relay Output is congured on the ‘Relay Options’ tab of the ‘Settings’ screen. A
unique sensor label can be congured for each relay, which could help to indicate what type of device
the relay is connected to. Each Relay Output can also be individually congured to turn a device on or
off in response to alarms being triggered and alarms being cleared.