User Manual

7 AVTECH Software Inc.
Installation Room Alert 32W
32W name is displayed as (Unknown) and the IP address is on the 169.254.x.x range, or if the Room Alert
32W is not found, see the ‘Device Not Found Or Invalid IP Address’ subsection below before continuing.
Once the Room Alert 32W monitor is listed or displayed in the ‘Device Status’ section, further actions
can be performed after selecting the desired device. These actions can be performed via the links
displayed below the device name in the ‘Device Status’ section or by the matching ‘Actions’ buttons
displayed to the right of the Room Alert 32W details, on the ‘Sensor Display’ tab. Selecting more than
one unit by holding down the CTRL key while selecting devices will allow you to view multiple devices
at the same time and perform actions on the group of selected devices.
The ‘Set IP Address’ feature is used to con gure a static IP address, Gateway IP address,
Subnet Mask, DNS server IP Address or to set the Room Alert 32W to obtain IP settings
automatically via DHCP. Click the ‘Set IP Address’ and ‘Use DHCP’ check boxes to
con gure the unit and obtain an IP address automatically. To assign static IP settings, enter
the valid IP settings for your network in the ‘IP Address’, ‘Gateway IP Address’,
‘Subnet Mask’ and ‘DNS Server IP Address’. Once you have the settings con gured as
desired, click the ‘Update IP Settings...’ button. You will see a con rmation window
explaining that the unit is rebooting and the updates will be applied.
The ‘Open Web’ feature allows you to quickly navigate to the ‘Status’ page on the
default web browser of the selected Room Alert 32W monitor by clicking the link or
button. The ‘Status’ screen shows the current sensor data and alarm status of each sensor.
The ‘Open Settings’ feature opens the default web browser and
displays the ‘Settings’ screen for the Room Alert 32W web interface.
The ‘Settings’ screen allows con guration for alerts, email, SNMP
and other settings. The Room Alert 32W is a standalone device
that does not require any additional software or equipment to function. However,
you can optionally con gure Email Noti cations and Actions from Device ManageR
which offers important advantages in  exibility and control over alerting which will
signi cantly increase the monitoring power of your Room Alert 32W.