Manual

Room Alert 12E
30 AVTECH Software, Inc.
4. Click Accept Changes at the bottom of your screen to temporarily save your settings.
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
5. Click Save Settings in the navigation bar to the left of your screen. Your Room Alert
12E will automatically reboot and commit your changes.
Advanced Sensor Configuration
Check Trigger Alarm If Sensor Is Disconnected? if you want to receive an alert if any of
the 3 external digital sensors become disconnected from the Room Alert 12E. This check box is
blank by default.
Alarm Options
Navigate to Settings Æ Alarm Options to open the Alarm Options screen. Here you may
configure devices connected through your Light Tower & Relay Adapter port and your Room
Alert 12E’s built-in relay output port.
TIP
For any of the switch sensor sets you leave unused on your
Room Alert 12E, choose Disabled from the “Alarm On” drop-
down menu to avoid confusion or false alerts.