Specifications

MENU FUNCTION
-44-
(2) Activate the R.E.T.R. Function:
‧ From DVR front panel:
Press ”Menu” and “－” buttons on the DVR front panel at the same time. R.E.T.R. function will be activated 3 / 5 / 10
minutes later. For detailed instructions, please refer to section “6.4.6 System”. A message “R.E.T.R. ON” will be shown
on the screen (in white text), and after the RETR function is activated, the message “R.E.T.R.” shown on the screen will
turn to red.
‧ From AP software at remote PC/NB side:
Press “R.E.T.R.” button on the AP control panel to activate the R.E.T.R. function immediately. Please refer to section
“7.3.1 DVR Control Panel”.
‧ From IR transmitter:
Press “R.E.T.R.” or “F3” button on the IR remote control to activate the R.E.T.R. function for 3 / 5 / 10 minutes later.
Please refer to the IR transmitter manual.
(3) Turn off the R.E.T.R. Function:
‧ From DVR front panel:
Press any key (except “SHIFT” and “POWER” buttons) and enter the password to turn off the RETR function.
‧ From AP software at remote PC/NB side:
Press “R.E.T.R.” button on the AP control panel again to turn off the R.E.T.R. function.
‧ From IR transmitter:
Press any key (except “SHIFT” and “POWER” buttons) and enter the password to turn off the RETR function.