User`s guide
18 AVTECH Inc.
Additional Screens And Interfaces TemPageR 3E
About
The TemPageR 3E ‘About’ screen provides general links and contact information for AVTECH sales, support
and websites. The rmware version that is currently installed on the TemPageR 3E unit will also be listed with
the date released directly below. The link entitled ‘Click Here To Check For Updates’ can be used to check if
the rmware version installed on the TemPageR 3E unit is the most current (requires internet access).
Web Interface
The TemPageR 3E web interface can be used to view current sensor status on the TemPageR 3E unit.
The web interface is accessed by selecting the TemPageR 3E unit in the AVTECH Device Discovery
Utility and clicking the ‘Web’ button or by typing the IP address of the TemPageR 3E unit in the location
bar of a web browser, once it has been installed properly on your network.
NOTE: If the ‘Loading Sensor Data’ indicator remains on the page, be sure that you do not have a proxy or Microsoft ISA
server soliciting trafc and requests from the TemPageR 3E unit.
Below the menu bar on the TemPageR 3E is the device name, date and time display, and MAC address display.
NOTE: If the date displayed is ‘2/14/36’, the TemPageR 3E is currently unable to connect to a time server. Please verify that
the network has a connection to the internet and that NTP requests on UDP port 123 are not blocked. If the network does not
have a connection to the internet or use of a local time server is desired, an IP address for a valid NTP time server can be
entered in the ‘Time Server IP’ eld on the ‘Advanced’ tab of the ‘Settings’ screen.
To the right of the date and time is the product name and rmware version number. This acts as a link that
can be used to determine if the rmware version installed on the unit is the most current version. An internet
connection is required for the rmware version check. The rmware is always current as of the time of
shipment so there is seldom a need to upgrade shortly after purchase of the TemPageR 3E. The exception
would be those occasions where a new version of the rmware has just coincidentally been released.
Using Trace Output
Trace output is very useful for troubleshooting sending SMTP email and other issues. The trace output
will show the communication between TemPageR and the congured mail server to show what might
be preventing email from being sent. It will also show other information including the current version
number, IP address, MAC address, requests to the web pages and much more.
To congure trace output in TemPageR, click ‘Settings’ and then ‘Advanced’. Select the ‘Enable
Tracing’ checkbox and enter the desired port number in the ‘Trace Port’ eld. Save the settings by
clicking the ‘Accept Changes’ button, then ‘Save Settings’. To view the trace output, click ‘Settings’ and
then ‘Advanced’. Click ‘View Tracing Output’ to open a trace window. When the trace window loads,
click ‘Connect’ to begin viewing the live trace output. Once trace is running, try to replicate any issues
that are occurring so they are captured in the trace output. If having issues sending email, send a test
email while viewing the trace output. Once captured, copy and paste the trace output into a text editor to
save the contents of the trace.
Help
The TemPageR 3E ‘Help’ screen provides links to online support and information resources for the
TemPageR 3E as well as information regarding telephone and email support. Directly below the
‘TemPageR 3E Help’ heading will be the current rmware version that is installed on the TemPageR
3E unit and its release date. The link entitled ‘Click Here To Check For Updates’ can be used to check
if the rmware version installed on the TemPageR 3E unit is the most current (requires internet access).
The additional support information provided on this screen is presented in the order that it should be
followed in the event that you have a technical question regarding the TemPageR 3E or if you are
experiencing a situation where assistance is desired.