User`s guide
14 AVTECH Inc.
External Sensor Options TemPageR 3E
External Sensor Options (For AVTECH Monitors)
Digital Temperature Sensor (TMP-SDT-SEN)
The AVTECH Digital Temperature Sensor provides a real-time digital temperature reading at
the location of the temperature probe. The temperature range is from -67° to 257° Fahrenheit
and/or -55% to 125° Celsius. Accuracy is within +/- 0.5 degrees. This is an instant ‘plug &
play’ sensor that connects to one of the external Environment Sensor Channels via an RJ-11 port.
Digital Outdoor Temperature Sensor (TMP-DOT-SEN)
The AVTECH Digital Outdoor Temperature Sensor allows real-time temperature values
from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius. Accuracy is within
+/- 0.5 degrees. The external silicon coating makes the Digital Outdoor Temperature Sensor
resilient enough for temperature monitoring outdoors or in other harsh environments. This
is an instant ‘plug & play’ sensor that connects to one of the external Environment Sensor
Channels via an RJ-11 port.
Digital Fluid Temperature Sensor (TMP-DFT-SEN)
The AVTECH Digital Fluid Temperature Sensor allows real-time temperature values from
-67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius. Accuracy is within + / - 0.5
degrees. Its non-conductive casing makes it a perfect sensor for monitoring the temperature
of uids in extreme environments, walk-in coolers, lab refrigerators or freezers. This is
an instant ‘plug & play’ sensor that connects to one of the external Environment Sensor
Channels via an RJ-11 port.
Digital Temperature & Humidity Sensor (RMA-DTH-SEN) *
The AVTECH Digital Temperature & Humidity Sensor provides a real-time digital
temperature and digital humidity reading at the location of the sensor probe. The temperature
range is from -67° to 257° Fahrenheit and/or -55° to 125° Celsius. Accuracy is within +/-
0.5 degrees. The humidity range is from 5 to 95 percent Relative Humidity (%RH) with
an accuracy within +/- 3.5%. This sensor will also provide the Heat Index or ‘Feels Like’
temperature. This is an instant ‘plug & play’ sensor that connects to one of the external
Environment Sensor Channels via an RJ-11 port
Flood Sensor w/8’ or 24’ Cable (RMA-F008-SEN, RMA-F024-SEN) *
The AVTECH Flood Sensor is available with a standard 8´ or 24´ ood sensor cable and
allows a real-time notication of ood or water leakage wherever the attached ood sensor
cable is located. This is an instant ‘plug & play’ sensor that connects to one of the switch
sensor contact sets via a low voltage 2-wire cable.