Operation Manual

NVR3
V. 02 – 01/12/2014 7 ©Velleman nv
8.5 Main Menu
Right-click anywhere on the screen to open the main menu. Right-click again to exit.
QUICK START
Click to set the status display, image settings, and date & time.
SYSTEM
Click to set the system configurations.
EVENT INFORMATION
Click to enter the event search menu.
ADVANCED CONFIG
Click to set CONNECTION, CAMERA, DETECTION, ALERT, NETWORK,
DISPLAY, RECORD, & NOTIFY.
SCHEDULE SETTINGS
Click to set record timer and event timer.
8.6 Playback Panel
Fast forward
Increase the speed for fast forward.
Fast rewind
Increase the speed for fast rewind.
/
Play/pause
Click to play the latest recorded video clip immediately, click again to pause.
In the pause mode, click once to get one frame forward, and click to get one
frame rewind.
Stop
Click to stop the video playback.
Slow playback
Click once to get 1/4x speed playback, and click twice to get 1/8x speed playback.
/
Previous /
next hour
Click to jump to the next/previous time interval in an hour, for example,
11:00 - 12:00 or 14:00 - 15:00, and start playing the earliest event video clip
recorded during this whole hour.
Quick search
Click to enter the quick search menu.
Repeat
Click to set point A and point B in a video clip. The system will play only the specified
range in that clip.
Backup
Click to open the backup menu for video backup.
8.7 Key Lock / Unlock
To lock or unlock NVR local operation, click (lock) or (unlock) on the NVR status panel.
When you unlock NVR local operation, the system asks you to enter a user name and password. The default
user name and password are both admin. These credentials give you access with the highest user level. For
more information, refer to the full user manual on the included CD-ROM.
9. Quick Operation
9.1 Switching on/off and Rebooting
To power off or reboot the NVR:
In the quick menu bar, click and then click (power off) or (reboot).