Quick Start Guide

IVSPROM2
V. 02 – 02/05/2012 8 ©Velleman nv
SYSTEM
TOOLS BAUD RATE 2400
SYSTEM INFO HOST ID 000
USB BACKUP R.E.T.R 5
DVD BACKUP AUTO KEY LOCK NEVER
CLEAR HDD HDD-0
RESET DEFAULT SUBMIT
REMOTE CONTROL ID 000
SERIAL TYPE RS485
VIDEO FORMAT NTSC
VERSION 1019-1008-
1010-1010
EXIT
5.6 Password setting
1. Right-click to show the main menu, and select SYSTEM > TOOLS to change the DVR password.
2. There are two user levels: ADMIN and OPERATOR. For details, please refer to 5.3.1 TOOLS in the full user
manual.
SYSTEM
TOOLS LANGUAGE ENGLISH
SYSTEM INFO ADMIN PASSWORD SETUP
USB BACKUP OPERATOR PASSWORD SETUP
DVD BACKUP UPGRADE SUBMIT
BACKUP CONFIG SUBMIT
RESTORE CONFIG SUBMIT
EXIT
6. GUI display with USB mouse control
6.1 Connect a USB mouse
1. Connect a USB mouse (not incl.) to the mouse port  on the DVR front panel, and check if there is a mouse
icon on the screen, indicating the USB mouse is detected properly.
2. Move your mouse to enter the DVR password with the password keypad. The default administrator
password is 0000.
The status will change from (key lock) to (administrator), and the quick menu bar appears on the left side
of the screen.
Note: There are two user levels for DVR access which can be set in the main menu SYSTEM > TOOLS.
Password Input Quick Menu (closed)