Quick Start Guide
Table Of Contents
- Quick Installation Guide
- 1. Introduction
- 2. Safety Instructions
- 3. General Guidelines
- 4. Features
- 5. Installing the Hard Disk Drive (HDD)
- 6. User Interface
- 7. Hardware overview
- 8. Connection and Setup
- 9. Basic Operation
- 10. Push Video Configuration
- 11. Mobile Surveillance via EagleEyes
- 12. Setting Up Push Video
- 13. Set flow counting – virtual fence – one-way pass
- 14. Technical Specifications
- Korte handleiding
- 1. Inleiding
- 2. Veiligheidsinstructies
- 3. Algemene richtlijnen
- 4. Eigenschappen
- 5. De hard disk drive (HDD) installeren
- 6. Gebruikersinterface
- 7. Overzicht hardware
- 8. Aansluiting en instelling
- 9. Basisfuncties
- 10. Push Video-configuratie
- 11. Mobiele bewaking via EagleEyes
- 12. Push Video-configuratie
- 13. Mensentelling - virtuele muur - mensenstroom
- 14. Technische specificaties
- Guide d'installation rapide
- 1. Introduction
- 2. Consignes de sécurité
- 3. Directives générales
- 4. Caractéristiques
- 5. Installer le disque dur (HDD)
- 6. Interface utilisateur
- 7. Aperçu du matériel
- 8. Connexion et configuration
- 9. Fonctionnement de base
- 10. Configurer la fonction push video
- 11. Surveillance mobile via EagleEyes
- 12. Configurer la fonction push video
- 13. Comptage de personnes - barrière virtuelle - flux humain
- 14. Spécifications techniques
- Guía rápida
- 1. Introducción
- 2. Instrucciones de seguridad
- 3. Normas generales
- 4. Características
- 5. Instalar el disco duro (HDD)
- 6. Interfaz de usuario
- 7. Descripción
- 8. Conexión y configuración
- 9. Funciones utilizadas frecuentemente
- 10. Configurar la función de notificación Push Video
- 11. Vigilancia a distancia por el móvil con EagleEyes
- 12. Configurar la notificación Push Video
- 13. Contador de personas – barrera virtual – flujo de personas
- 14. Especificaciones
- Schnelleinstieg
- 1. Einführung
- 2. Sicherheitshinweise
- 3. Allgemeine Richtlinien
- 4. Eigenschaften
- 5. Die Festplatte installieren (HDD)
- 6. Benutzeroberfläche
- 7. Beschreibung
- 8. Anschluss und Konfiguration
- 9. Häufig benutzte Funktionen
- 10. Push Video-Konfiguration
- 11. Fernüberwachung über EagleEyes
- 12. Push Video einstellen
- 13. Personenzählung – virtuelle Mauer – Flusskontrolle
- 14. Technische Daten
- Guia rápida para instalação
- 1. Introdução
- 2. Instruções de segurança
- 3. Normas gerais
- 4. Características
- 5. Instalação da drive de disco rígido (HDD)
- 6. Interface do utilizador
- 7. Visão do hardware
- 8. Instalação e ligação
- 9. Utilização básica
- 10. Configuração da função push vídeo
- 11. Vigilância móvel através do EagleEyes
- 12. Configurar o envio de notificações
- 13. Configure a contagem de fluxo – barreira virtual – passagem numa direcção
- 14. Especificações
DVR16H2
V. 01 – 28/03/2013 17 ©Velleman nv
12.1 Prerequisite
Before setting up push video, make sure you have checked the following:
You have an iPhone, iPad, or Android mobile device with EagleEyes installed. For more details, see
Downloading EagleEyes.
A human detection camera is connected to CH1, or an external alarm device is connected to the push video
alarm-in terminal on the rear panel. To record alarm occurrences, make sure you also have a camera
connected. Refer to Push Video Configuration for details on video channels and alarm pins.
The event record function of your DVR is enabled.
The motion detection function of your DVR is enabled.
Your DVR is connected to internet. For details, refer to
http://www.surveillance-download.com/user/CMS.pdf.
12.2 Enabling Push Video
From iPhone or iPad
1. In the iPhone/iPad main menu, select Settings > Notifications.
2. Select EagleEyes and make sure Notification Center is set to ON.
3. Open EagleEyes and switch the Push Video button to ON. You will receive a message that push notification
(push video) is enabled.
4. Return to the main menu of your iPhone/iPad.
You will receive event notifications when there is a human detection or an alarm event. Select Launch to
play the recorded clip immediately.