Quick Start Guide
Table Of Contents
- Quick Installation Guide
- 1. Introduction
- 2. Safety Instructions
- 3. General Guidelines
- 4. Features
- 5. Installing the Hard Disk Drive (HDD)
- 6. User Interface
- 7. Hardware overview
- 8. Connection and Setup
- 9. Basic Operation
- 10. Push Video Configuration
- 11. Mobile Surveillance via EagleEyes
- 12. Setting Up Push Video
- 13. Set flow counting – virtual fence – one-way pass
- 14. Technical Specifications
- Korte handleiding
- 1. Inleiding
- 2. Veiligheidsinstructies
- 3. Algemene richtlijnen
- 4. Eigenschappen
- 5. De hard disk drive (HDD) installeren
- 6. Gebruikersinterface
- 7. Overzicht hardware
- 8. Aansluiting en instelling
- 9. Basisfuncties
- 10. Push Video-configuratie
- 11. Mobiele bewaking via EagleEyes
- 12. Push Video-configuratie
- 13. Mensentelling - virtuele muur - mensenstroom
- 14. Technische specificaties
- Guide d'installation rapide
- 1. Introduction
- 2. Consignes de sécurité
- 3. Directives générales
- 4. Caractéristiques
- 5. Installer le disque dur (HDD)
- 6. Interface utilisateur
- 7. Aperçu du matériel
- 8. Connexion et configuration
- 9. Fonctionnement de base
- 10. Configurer la fonction push video
- 11. Surveillance mobile via EagleEyes
- 12. Configurer la fonction push video
- 13. Comptage de personnes - barrière virtuelle - flux humain
- 14. Spécifications techniques
- Guía rápida
- 1. Introducción
- 2. Instrucciones de seguridad
- 3. Normas generales
- 4. Características
- 5. Instalar el disco duro (HDD)
- 6. Interfaz de usuario
- 7. Descripción
- 8. Conexión y configuración
- 9. Funciones utilizadas frecuentemente
- 10. Configurar la función de notificación Push Video
- 11. Vigilancia a distancia por el móvil con EagleEyes
- 12. Configurar la notificación Push Video
- 13. Contador de personas – barrera virtual – flujo de personas
- 14. Especificaciones
- Schnelleinstieg
- 1. Einführung
- 2. Sicherheitshinweise
- 3. Allgemeine Richtlinien
- 4. Eigenschaften
- 5. Die Festplatte installieren (HDD)
- 6. Benutzeroberfläche
- 7. Beschreibung
- 8. Anschluss und Konfiguration
- 9. Häufig benutzte Funktionen
- 10. Push Video-Konfiguration
- 11. Fernüberwachung über EagleEyes
- 12. Push Video einstellen
- 13. Personenzählung – virtuelle Mauer – Flusskontrolle
- 14. Technische Daten
- Guia rápida para instalação
- 1. Introdução
- 2. Instruções de segurança
- 3. Normas gerais
- 4. Características
- 5. Instalação da drive de disco rígido (HDD)
- 6. Interface do utilizador
- 7. Visão do hardware
- 8. Instalação e ligação
- 9. Utilização básica
- 10. Configuração da função push vídeo
- 11. Vigilância móvel através do EagleEyes
- 12. Configurar o envio de notificações
- 13. Configure a contagem de fluxo – barreira virtual – passagem numa direcção
- 14. Especificações
DVR16H2
V. 01 – 28/03/2013 15 ©Velleman nv
Alarm sensor connection
Connect the alarm sensor, such as magnetic contacts, to the push video alarm-in terminal or I/O pins that
support push video on the DVR rear panel.
10.2 Configuration
Before configuring push video, make sure that:
The DVR system is set up as described in Connection and Setup.
The DVR is connected to internet.
You have installed the EagleEyes app on your iPhone, iPad, or Android mobile devices.
For details, please refer to Mobile Surveillance via EagleEyes.
To configure push video:
1. Right-click to show the main menu and select (ADVANCED CONFIG) > NOTIFY.
2. Set GUARD to ON.
3. Configure your alarm sensor type (normal open or normal closed).
Careful! You have to select the opposite type for push video to work correctly.
If your alarm sensor is N.C. (normal closed, alarm goes off when the contact opens), then select
ALARM N.O.
If your alarm sensor is N.O. (normal open, alarm goes off when the contact closes), then select
ALARM N.C.
ADVANCED CONFIG
CAMERA
PUSH VIDEO
PUSH MESSAGE
MESSAGE MAIL
VIDEO MAIL
DETECTION
GUARD
ON
ALERT
CH01
ALARM OFF / INTERNAL ALARM
CH1
NETWORK
CH02
ALARM OFF
CH2
DISPLAY
CH03
ALARM N.O.
office
RECORD
CH04
ALARM OFF
CH4
DEVICES
DCCS
IVS
NOTIFY
EXIT